Elastic paste adhesive for Klimex Brick tiles, stone tiles and ROS UltraFlex Bricks
On almost all surfaces for indoor and outdoor use.
Instructions for use
The surface should be sturdy, dry and free from dust and grease.
Pre-treat absorbent or dusty surfaces with Klimex primer.
Apply the adhesive to the wall with a serrated 6x6 or 8x8 mm serrated trowel.
Apply the stone strips within 10 - 15 minutes into the adhesive with a sliding motion.
For inside walls the stone strips should have a minimum of 60% surface contact with the adhesive, and 80% for outside walls.
Use a moist paintbrush to smooth the adhesive grooves into the joint.
Avoid excessive moisture to prevent contamination of the product.
While the adhesive is setting, protect the stone strips against damp, frost and bright sunshine.
Remove any fresh remains of adhesive with clean water.
Store in frost-free conditions.
Contains 16kg: Sufficient for internal use +/- 5m2, external use +/- 3m2